ExxonMobil
PROPERTIE
測試項目
UNITS
單位
TEST METHODS(ASTM)
測試方法
HIGH DENSITY POLYETHLENE FOR INJECTION MOLDING APPLICATIONS
Grade No.
HMA 016

Melt index

(2.16 kg)
g/10 min
D 1238
20
Density
g/cm3
D 1928/D 1505
0.956
Melting Point
(DSC)
°C
D 3418
131
Crystallization
(DSC)
°C
D 3418
114
Vicat Softening point
(DSC)
°C
D 1525

121

Elastic modulus
(0.05 - 0.25 %)
MPa
ISO 527-2/1B/1
880
Flexural Modulus
(0.05 - 0.25 %)
MPa
ISO 178
920
Tensile at Yield
MPa
ISO 527-2/1B/1
23　
Elongation at break
%
ISO 527-2/1B/1
> 100
Elongation at yield
%
ISO 527-2/1B/1
10
Izod Impact
kJ/m2
ISO 180-4A

4.5

Shore Hardness - D
(15 sec)
ASTM D 2240
60
ESCR
(F 50, 100 % lgepal)
h
ASTM D 1693
1.2

The specifications contained in this page are for reference only. Luen Fung Hong Plastic Materials Co., Ltd makes no representation whatsoever as to their currency and accuracy. In no way should any buyer rely on these specifications or make further representations to third parties based on these specifications. The manufacturer of the particular product should be consulted for the most current and accurate specifications.